What problems should be paid attention to when the mill is transported and kept?

- Jul 24, 2018 -

   Mill is becoming more and more important in modern industrial production, as a producer and user, we all need to keep abreast of its knowledge. This will enable our mill to play a better role and value. In the transport and custody of the time, we should also do a good job on the mill protection, so as not to affect its performance.

   Let's take a look at some of the relevant content below. Normally, we need to package the mill before we carry out the transportation. This is done primarily to protect against damage during transit. Usually, the machine is in bulk shipping mode.

   In other words, the different parts of the need to choose different packaging, such as motor parts should be used plastic sheeting to prevent damp. At the same time for some exposed parts also need to be wrapped in accordance with the requirements to prevent damage. In addition, in some parts should also apply the right amount of antirust oil to prevent rust. In addition, we also need to follow some rules in the process of transporting mills.

    For example, when loading and unloading, should be carefully operated, the ropes should be used to ensure that sufficient strength. After the packing is completed, the parts of the mill shall be fixed and then transported. If necessary, soft protective material should also be used for protection against shock or vibration during transit.

    Of course, in the course of driving, it is best to keep the speed of uniform driving. Finally, we need to remind you that when the mill arrives at the destination, the user should do the check and inspection work. If there is a mistake, the reason should be ascertained in time. After the mill is removed, it should be placed in a ventilated and dry room to prevent rust damage.